Step 1: Site Preparation
Decide on a space where you want to place the powder packaging machine. Make sure the space is well-ventilated and dry. Also, consider a level floor that can support the machine’s weight.
Step 2: Unpacking and Inspection
Use a lifting tool to unpack the machine with care. Look for any missing or damaged parts. If you find any issues, immediately contact the supplier or packaging machine manufacturer.
Step 3: Positioning the Machine
Move the machine to the selected location, ensuring leveled placement on the floor. Use lag bolts to secure the device on the ground firmly. This will prevent unnecessary movement of the machine while operating.
Step 4: Electrical and Pneumatic Connections
Connect the machine to the power supply following the manufacturer’s instructions. Ensure the machine and power source are voltage-compatible. However, if it requires a compressed air supply, connect the device to a pneumatic system.
Step 5: Initial Setup and Calibration
Adjust settings such as fill weights, sensors, and machine control systems. Also, the rotation of the motors must be fixed. The filling motor must be directed counterclockwise. In contrast, the agitator motor should be directed clockwise.
Step 6: Test & Run
Power on the machine and text if all the parts are moving correctly. You can do a small test run to optimize performance by filling the hopper with powder and snake adjustment. Also, check for consistent filling and sealing, as well as any signs of clogs or leaks.
18455169137@163.com
24-hour online service
+86-18455169137
Current Location: